Amplimesh – Australian Standards Compliant

Amplimesh window security screens and security screen doors comply with or exceed the requirement of the following Australian Standards.

Amplimesh® products are subjected to a rigorous regime of impact tests, jemmy attacks and pull testing under this standard, to ensure that the inherent strength and structural integrity of the manufactured security product is maintained.
SecuraMesh® Grilles are tested for material hardness under this standard, to ensure the force required to sever the cords of SecuraMesh® grilles meet or exceed the requirements of the standard.
SupaScreen® Stainless Steel meshes are tested for material hardness and tensile strength by subjecting the mesh to a standardised physical cutting attack, which draws a knife over the mesh a number of times.
SupaScreen® Stainless Steel Security products have been tested in general accordance with this standard and when exposed to incident radiant heat SupaScreen® achieves a 41% reduction in the radiant heat flux between the inside and outside of the product.
SupaScreen® Stainless Steel Security products have been tested under this standard and satisfied the requirements for Bushfire Attack Level (BAL) 40.
In cyclonic regions windows and doors may need to be protected from flying debris, SupaScreen® Stainless Steel Security products have been tested to this standard, resisting the 4kg, 100mm x 50mm timber travelling at 15m/s.
QLD Government, Design Guidelines for Aust. Public Cyclone Shelters, 2002. Department of Health, Western Australia Health Facility Guidelines for Engineering Services, 2006. SupaScreen® Stainless Steel Security products have also been tested to and satisfied the more onerous testing regime of this Standard. The same piece of timber is impacted into the screen at the faster speed of 20m/s followed by 8mm Steel balls at 30m/s followed by fatigue testing.

And furthermore…

  • SupaScreen® 316 marine grade stainless steel exceeds the exposure milestone of 8000 hours of salt spray.
  • SupaScreen® by Amplimesh proudly uses high-tensile 316 marine grade stainless steel in all SupaScreen® security products.
  • High tensile stainless steel wire with a minimum strength of 850MPa.
  • Ask us about the Amplimesh 10 year warranty.